BALTENSWEILER PINA LED, Assembly And Operating Instructions, Page: 2 / 2

LICHT UND LEUCHTEN www.baltensweiler.ch Tel. +41 41 429 00 30
BALTENSWEILER
info@baltensweiler.ch
90°
90°
Luzern, 27 July 2018 / SaWa M 1204 / 32628
!
Clamp Base Wall bracket
Transformer box is held
by a magnet
See supplementary sheet M 1130
PINA LED
OPERATING INSTRUCTIONSTIONS
Safety information, protection class and instructions
The magnet must be attached to the rod.
The main switch is on the underside of the luminaire head
On / Off: Short press
Dim function: Long press / 5 phases
The joints were tested and adjusted correctly.
If the joint is too loose, tighten the screw with the Allen key at a 90° position.
Attention: Do not tighten the joints too firmly as this could damage them.
Operating instructions
1
3
2
1
2
3
3
Package content
Upper joint:
RIGHT
WRONG
- Rod with luminaire head
- Suspension kit (Allen key)
- Please order optics separately