WIND-SURFER
Assembly Diagram
Should you require assistance during assembly, please call our
Customer Service Department Monday - Friday 8 a.m. - 5 p.m. Central Standard Time
Toll-Free Customer Service - 1-800-749-2258
Illustration # 1
To Assemble:
1. Separate and Identify all the Parts and Hardware.
2. Place Top Panel (P-3) upside down on floor or table and attach Right Leg (P-1) and Left Leg (P-2) using 6 Flat
Head Screws (A1) and 6 Square nuts (B) as shown in illustration # 1. (Hand tighten only)
3. Attach Middle Shelf (P-6) to Right Leg (P-1) and Left Leg (P-2) using 4 Flat Head Screws (A1) and 4 Square
nuts.
4. Attach Bottom Shelf (P-4) to Right Leg (P-1) and Left Leg (P-2) using 4 Flat Head Screws (A1) and 4 Square
nuts (B).
5. Attach 2 Locking Casters (D) to the front, and 2 Casters (E) to the back of the unit. Tighten all Casters using
Caster Wrench (G).
P-6
P-1
P-3
P-2
P-4
A-1
B
E
D
