4
Illustration # 2
Ergo E.Eazy
Assembly Diagram
Place the Top Platform (P-1) with the insert nuts facing up. Attach Cable Management Tray
(P-11) to the Top Platform (P-1) using 3 ( A) Screws as shown in illustration #2.
Attach Height Adjust Bracket (P-5) to the Top Platform (P-1) using 4 ( A) Screws as shown in
illustration #2.
(Do not tighten screws all the way)
Height Adjustment Lever may be mounted to the left or the right side of the Top Platform (P-1).
[Keyboard Platform is mounted on the opposite side.]
After choosing which side, secure Height Adjust Lever (attached to P-5) to the Top Platform
(P-1) using 3 (B) Screws as shown in illustration #2.
P11
P1
A
A
P5
Do not use unless all screws are tight. At least every six months, check all screws
to be sure they are tight. If parts are missing, broken, damaged, or worn, stop use
of the product until repairs are made by your dealer using factory authorized parts.
6.
7.
8.
Missing Parts or UPS Damaged Parts
For Your Convenience you can
EMAIL us at
24HOURS 7 DAYS A WEEK
Height Adjust
Lever
B
