4
Illustration # 3
Illustration # 4
H
P2
P3
5.)
To Secure Cam Locks, Insert Large
Phillips Head Screwdriver and turn Cam
Lock 1/4 turn (90 degrees) clockwise.
Place the Left Side Panel (P2) with the
insert nuts facing up.
Install 6 each Cam Posts (H) in the 6
threaded insert nuts (Pre-installed) as
shown in illustration # 3.
Repeat Steps 5 & 6 for the Right Side
Panel(P6).
Place the Back Panel (P5) with the
insert nuts facing up. Slide 1 each
Upper Shelf Platform (P4) over the
Cam Posts (H)
as shown in
illustration # 5.
Secure by turning
the Cam Locks (H) 1/4 Turn
until they lock.
Slide 1 each Top Platform (P3) over
the Cam Posts (H)
as shown in
illustration #5
and secure by turning
the Cam Locks (H) 1/4 Turn until they
lock.
(Finger tighten only)
Place the Top Platform (P3) with the
Holes facing up and install 6 each
Cam Locks (G) into the large holes
as shown in illustration # 4.
G
P2
G
G
P4
G
P5
H
H
6.)
7.)
8.)
9.)
10.)
Illustration # 5