SCAMP-1
Assembly Diagram
Illustration # 2 - Base Assembly
5. Place the Bottom Shelf (P-3) with the insert
nuts facing up. Attach Foot Assembly (P-2)
using 4- (1½” long) Flat Head screws (A2) as
shown in illustration # 2.
6. Attach Lower Insert (P-1) to Bottom Shelf
(P-3) and Foot assembly (P-2) using 4
(1½” long) Flat Head screws (A2) and 4
Interior threaded Posts (C) as shown
in illustration
P-1
P-2
P-3
A2
D
E
A2
C
Front
7. Attach Casters to Foot assembly (P-2) [ 2 Locking casters (D) in the front and 2
Casters (E) in the back.] Note the location of the small hole on the Lower Receiver
(P-1) which determines front and back of the unit as shown in illustration #2. Tighten
the Casters using Caster Wrench (G).
