3
1.)
R
EAD
T
HROUGH
I
NSTRUCTIONS
FROM
BEGINNING
TO
END
BEFORE
STARTING
TO
ASSEMBLE
UNIT
.
Identify and Separate all the Parts and Hardware.
Adjustable Height Carrel Assembly Instructions
H
A
2.) Screw in a Glide (H) into the botom of two Insert Legs (P-4). Place an Insert Leg (P-4) into each of
the two Front Upper Legs (P-1) and secure at the height you want using two Screws (A) as shown
in illustration #1. Tighten Screws(A) with Allen Wrench (C). Screw in three Camposts (B) into each
Front Upper Leg (P-1).
3.) Screw in a Glide (H) into the bottom of one Insert Leg (P-4). Place the Insert Leg (P-4) into the
bottom of the Left Back Upper Leg (P-3) and secure at the same height as the Front Legs using
two Screws (A) as shown in illustration #2. Tighten Screws (A) with Allen Wrench (C). Screw
in six Camposts (B) into the Left Back Upper Leg (P-3).
Illustration # 2
Illustration # 1
B
P-4
P-1
P-4
P-3
B
H
A
B
4.) Screw in a Glide (H) into the bottom of one Insert Leg (P-4). Place the Insert Leg (P-4) into the
bottom of the Right Back Upper Leg (P-2) and secure at the same height as the Front Legs using
two Screws (A) as shown in illustration #3. Tighten Screws (A) with Allen Wrench (C). Screw in
six Camposts (B) into the Right Back Upper Leg (P-2).
H
B
B
A
P-4
P-2
Illustration # 3