A
Flat Head Screw
16 EA
B
Interior Threaded Post
8 EA
C
Leveling Feet
4 EA
D
2” Locking Casters (for Front)
2 EA
E
2” Casters(for Back)
2 EA
F
Allen Wrench
1 EA
G
Caster Wrench
1 EA
H
Cable Clips
4 EA
Part
Drawing
Description
Qty
Drawing Description Qty
Dual Laser Printer Stand 23701
Hardware List
Parts List
P-1
P-2
P-3
P-4
P-5
To Assemble:
(For convenience Printer Platforms may be installed with unit turned up-side-down.)
1.) Identify and Separate all the Parts and Hardware.
2.) Attach Bottom Stability Panel (P-4) to 2 Leg Assemblies (P-2) using 4 Screws (A) and
4 Interior Threaded Posts (B).
3.) Attach Back Stability Panel (P-3) to the 2 Leg Assemblies (P-2) using 4 Screws (A) and
4 Interior Threaded Posts (B).
4.) Attach Top Printer Platform (P-1) to the 2 Leg Assemblies (P-2) using 4 Screws (A).
5.) Attach Middle Shelf (P-5) to the 2 Leg Assemblies (P-2) using 4 Screws (A).
6.) Attach 4 Leveling Feet (C) or Casters to the Leg assemblies. [If casters, 2 Locking
casters (D) in the front, and 2 casters (E) in the back. Tighten the casters using Caster
wrench (G).
7.) Tighten all the screws securly using the Allen wrench.
Do not use unless all screws are tight. At least every six months, check all screws to be sure they are
tight. If parts are missing, broken, damaged, or worn, stop use of the product until repairs are made
by your dealer using factory authorized parts.
Important Information:
Top Panel
Leg Assembly
Back Stability Panel
Bottom Stability Panel
Middle Shelf
1 EA
2 EA
1 EA
1 EA
1 EA
