5
Illustration # 5
7.)
P-2
P-4
6.)
#89875-04/04/07
The Balt product you have purchased is guaranteed against material and workmanship defects. This
guarantee extends 1 year from date of purchase. Should this product fail to function satisfactorily under normal
use due to defect or imperfection, the defective part or product will be replaced. Damage caused by common
carriers during shipment is not included in this guarantee.
This guarantee sets forth all applicable guarantees and remedies. No other warranty, expressed or
implied shall apply. Failure to follow instructions found in Important Information Section of Owner
Sheet shall void the guarantee. Consequential or incidental damages and or costs are not refundable.
Important
Attach Cord Winder (P-5) and Electrical Strip (P-6) to either
side of Top Shelf (P-2), or Base Cabinet (P-1) using 2
screws (A2) and 2 Hex Nuts M5 w/Flange (B2).
Remove Plastic Grommet and place Rubber Mat (P-4) on the
Top Shelf (P-2). Insert Plastic Grommet into hole in Mat (P-4)
and Top Shelf (P-2) as shown in illustration #5.
Tighten all screws using Phillip’s head
screwdriver and Wrench (Not Provided).
P-6
P-5
A2
A2
B2
B2
8.)
Plastic
Grommet
