3
#89869 Add-on Floor Carrel
Assembly Diagram
To Assemble:
I
dentify and Separate all the Parts and Hardware.
Illustration # 1b
Place the Middle Leg (P-5) with the three threaded
holes facing up. Install 7 Cam Posts (D)
in Leg as shown in illustration # 2.
Install 1 Leveling Glide (G) in the bottom
of leg as shown in illustration # 2.
Tighten Cam Posts (D) using
Phillips Screwdriver.
D
P-5
1.
2.
3.
D
E
Do not use unless all screws are tight. At least every six months, check all screws
to be sure they are tight. If parts are missing, broken, damaged, or worn, stop use
of the product until repairs are made by your dealer using factory authorized parts.
4.
Illustration # 2
Remove Keyboard from #89830 Carrel as shown
in illustration # 1a. Remove left leg Assembly
from #89830 Carrel as shown in illustration # 1b.
Illustration # 1a