4
To Assemble:
Identify and Separate all the Parts and Hardware.
Place the Left Side Panel (P1) with the Predrilled holes facing up. Attach 1 Keyboard Slide (B)
to Left Side Panel (P1) and secure using 2 Wood Screws (A3) as shown
in illustration #1.
(See Slide Detail on Page 3)
Install 3 each Cam Posts (E) in the 3 threaded insert nuts (Pre-installed)
as shown in illustration #1.
Install 4 each Wood Dowels (F)
in the 4 Holes as shown in illustration #1.
Install 2 Cam Locks (D) into the 2 large
holes as shown in illustration #1
Illustration # 1
F
A4
D
1.
2.
3.
P-1
A3
6.
#89853
Command Center
Assembly Diagram
Attach 1 each Door Magnet (M) to the Left Side Panel (P1) and
secure using 2 Wood Screws (A4) as shown in illustration #1.
F
E
M
B
4.
5.
Be sure that arrow on
top of Camlock (N)
aligns with centerline
of Edge Drilled hole.
Phillips
Screwdriver
Centerline
of Edge
Drilled hole.
Arrow