6
P-1
Be sure that arrow on
top of Camlock (C)
aligns with centerline of
Edge Drilled hole.
Phillips
Screwdriver
Centerline of
Edge Drilled
hole.
Arrow
P-3
C
Place the Bottom Panel (P-3)
with the Pre-drilled holes facing
up and install 4 Cam Locks (C)
in the 4 large holes as
shown in illustration # 5.
13.
Illustration # 5
Insert 1 each Lock Cylinder(G) through the Lock
Plate (J) and the hole in the CPU Door (P-17).
Secure Lock Cylinder (G) using the Lock Washer (L) and the Lock
Hex (M). (F
INGER
T
IGHTEN
O
NLY
.)
Slide Lock Retainer (H) over the square end of Lock Cylinder (G).
Secure using the ¼” Phil Head Lock Screw (A8). Before tightening
the Lock Hex (M), Insert the Key (N) and turn lock. Be sure lock is
aligned with Key slot as shown in Illustration #5A.
T
IGHTEN
L
OCK
H
EX
(M)
Repeat Steps 14-18 for Right CPU Door (P-18).
J
H
Attach 2 Hinges (R) to the
Left CPU Door (P-17) using 6 Screws
(A5) as shown in illustation #5.
Attach 1 Door Knob (P) to Left CPU
Door (P-17) using 1 screw (A6).
Attach Strike Plate (K1) to Left CPU
Door (P-17) using 1 screw (A4).
14.
17.
18.
M
A8
L
P
G
P-17
K1
A4
A6
R
A5
A5
Illustration # 5
Door
Front view
Locked Position
Illustration # 5A
G
H
15.
16.
19.
P-18
A5
R
