7
22.Attach Back Panel (P-8) to the
Left & Right Side Panels (P-1 & P-2) using 4
Screws (A9) as shown in illustration # 8.
Place the Table Top (P-4) with the Predrilled
holes facing up and install 4 each Cam Posts
(D) in the 4 threaded insert nuts (Pre-installed)
as shown in illustration # 9.
Install 4 Wood Dowels (E) into the 4 holes in
the Table Top (P-4).
Slide Wood CPU Assembly over the Wood
Dowels (E) and the Camposts (D) in the Table
Top (P-4) as shown in illustration # 9. Turn the
Cam Locks (C) 1/4 turn until they lock.
25.
23.
24.
Secure Wood CPU Assembly to the
Table Top (P-4) using 2 screws (A).
Attach Upper Leg Mount (P-9) to the Table Top (P-4) using 2 Screws (A)
as shown in
illustrations # 9.
Tighten Screws using Allen Wrench (V).
P-9
A
E
D
A
E
D
F
P-10
A
P-4
D
Wood CPU
Assembly
Illustration # 9
F1
F1
P-2
P-1
Use a hammer to install 4 Plastic Glides (F1) in the bottom of Left
Side Panel (P-1) and Right Side Panel (P-2) as shown in illustration #9.
A9
Illustration # 8
P-1
P-2
26.
27.
28 Install 2 Leveling
Glide (F) in the
bottom of the
Lower Leg
Mount (P-10) .
29.
To Secure Cam
Locks, Insert Large
Phillips Head
Screwdriver and
turn Cam Lock 1/4
turn (90 degrees)
clockwise.
P-8
A9