Illustration #7
Illustration #6
7.
8.
Place the Back Panel assemblies from Step 5 and Step 6 in between the Right and Left Side
assemblies as shown in illustration #6. Make sure the Wood Dowels of the assemblies are insert
into the predrilled holes in the bottom of the Top Panel (P-1). Secure the Back assemblies to
each Side Panel assembly using three Screws (C). Tighten Screws with Allen Wrench (G). At-
tach the Magnet (T) to the bottom of the Top Panel (P-1) using two Magnet Screws (U) into the
predrilled holes so the Rear Door (P-6) stops against the Magnet. See Detail 7A.
P-1
C
C
P-11
P-12
P-6
To attach the Bottom Panel (P-2) to the assembly from Step 7, line up the Wood Dowels in the Back
assemblies with the predrilled holes in the Bottom Panel (P-2). Attach the Bottom Panel (P-2) to
the Side assemblies using four Screws (B) as shown in illustration #7. Tighten Screws with Allen
Wrench (G).
B
B
P-2
Detail 7A
T
U