5
Illustration # 4
Illustration # 3
4.)
P-2
6.)
D
C
D
E
D
F
C
D
F
Push in two Wood Dowels (D) into the top edge of the Side Panel (P-2) and two Wood
Dowels (D) into the bottom edge of the Side Panel (P-2) as shown in illustration #3.
5.) Screw in two Camposts (C) into the threaded holes
near the back of the Side Panel (P-2). Push in two
Wood Dowels (D) into the predrilled holes next to the
Camposts you just installed. See illustration #3.
Insert two Cams (F) into the large top predrilled holes
in the Side Panel (P-2). Make sure the arrows on the
Cams are pointed up. Insert two Cams (F) into the
large holes at the bottom of the Side Panel (P-2).
Make sure the arrows on these Cams are pointed
down. See illustration #3.
Place two Shelf Supports (E) into the center set
of predrilled holes of the Side Panel (P-2).
This will be the right Side Panel assembly.
7.)
8.) Repeat Steps 4 through 7 for the second Side Panel (P-2). This will be the
left Side Panel assembly. See illustration #4.
P-2
D
C
D
E
D
F
C
D
F
Front
Front