The River, User Manual
PAGE
33
PAGE
33
6. DLFO (DIGITAL LFO)
6. DLFO (DIGITAL LFO)
Each channel has a digital LFO unit which simultaneously all voices assigned to that channel. Very useful for creating filter
scans, changes in pitch or oscillators in phase sync. It is becoming synchronized with the clock source (internal or external).
Oscillators and filters have a DLFO potentiometer to precisely dose the modulation DLFO on the corresponding module.
WAVEFORM:
Choice of waveform DLFO
WAVEFORM:
Choice of waveform DLFO
mod
Dial, lets you "draw" with the modulation wheel Sin
sine
Star
triangle
Square
Saw
Square Up
Tooth rising Saw Saw tooth
descending Down saw S & H
Sample & Hold
Random Random Tape
Wow Band AR Up
Envelope envelope Rising
Down AR Descending.
*
TRIG S & LOOP:
Retrigger Mode Choice DLFO None cycle
TRIG S & LOOP:
Retrigger Mode Choice DLFO None cycle
Free Reset
Cycle
Retrigger cycle with each depression of key Loop
Retriggering analog envelopes (loudness and filter) in each cycle Loop + Reset retriggering of the cycle at
each key depression and envelopes at each cycle.
*
S SYNC:
Choice of the synchro ring DLFO with the clock (internal or external) None
S SYNC:
Choice of the synchro ring DLFO with the clock (internal or external) None
The DLFO is not synchronized with the clock source 1/4
The DLFO cycle is triggered every time 4 1/2
The DLFO cycle is triggered every 2 1/1 days
The cycle DLFO fires every time.
RATE (0 ... 400)
DLFO modulation rate. For waveform type AR, it is the rise time.
RATE (0 ... 400)
DLFO modulation rate. For waveform type AR, it is the rise time.
AMPL / RATE:
balance of the action of four modulation sources (WHEEL, VELOCITY, AFTERTOUCH, PEDAL IN) to the magnitude
AMPL / RATE:
balance of the action of four modulation sources (WHEEL, VELOCITY, AFTERTOUCH, PEDAL IN) to the magnitude
or the speed of DFLO. It is expressed to the left by the percentage of action on the speed and on the right by the percentage of action
on the amplitude. All right, modulations only affect the speed, while left modulations only affect the amplitude. In the center, the two
parameters are assigned 100%