14
15
EXAMPLE:
If you are looking at a list of devices on the SmartLink network,
you can use short presses to move from one device to the next. When you
have the desired device highlighted, a long press will select the device,
and show the real-time data for that device. Similarly, if you are again back
at the list of devices, and use short presses to highlight “Setup”, a single,
long press will take you to the setup menu for the selected device.
The extra-long press will reset the SmartLink network, which may be helpful
after software updates, in lieu of removing and replacing the fuse.
Bluetooth Gateway
The SG2-0300 Bluetooth gateway is a useful addition to the SmartLink net-
work. It can be used to both monitor and configure SmartLink devices through
an APP on both Apple and Android smartphones and tablets.
The Gateway also allows for periodic upgrading of devices, as new features or
improvements are rolled out.
NOTE
: There are differences in the functionality available when using
the SmartShunt with the color display, or directly to the Balmar APP.
NOTE
: When using the APP to upgrade SmartLink devices, always start
with upgrading the Bluetooth Gateway itself, if it has an upgrade available.
You see the changes in the latest upgrades, as well all previous versions here:
http://www.balmar.net/sg200-upgrades/
Real-Time Data
Once a SmartShunt is selected, the SG200 will display the Real-Time
Data for that SmartShunt. Selecting a different SmartShunt will allow you
to view the data from that SmartShunt and battery-bank. You will see the
SmartShunt bank selected on the top bar of the SG200 screen.
Real-Time Data parameters
Parameter
Unit
Note
Voltage
Volts (V)
Voltage of the Battery Bank
State of
Charge (SoC)
Percent (%)
SoC is a percentage of the
actual full-charge capacity of
the battery, NOT the design
capacity Also, See the section
“Initial Accuracy”
State of Health
(SoH)
Percent (%)
SoH is the battery’s existing, or
actual aged capacity compared
to the initial design capacity.
Current
Amps (A)
Shows the NET of
simultaneous charge, minus
any discharge.
Time
Remaining
Hours: Minutes
Shows time remaining until
battery is 50% (20% for
LiFePO
4
) discharged when the
battery is discharging. When
charging, shows the time until
charge completion. .
Voltages for
two separate
Auxiliary
batteries
Volts (V)
Typical usage would be the
starter battery for one or two
engines, or a single engine and
generator.
NOTE:
If left on any MENU screen, the Display
will revert to Real-Time Data after a time.
Google Play Store
Search “Balmar”
Apple App Store
Search “Balmar”
