-
Attach Handrail Bracket (K) to Top Handrail (F) and attach to Stair Section (A) using 5/16” X 2” bolts
(4) and locknuts (6). Handrail Brackets (K) should be positioned on the
inside
of the Stair Section.
-
Mount Lower Handrail (G) to Stair Section (A) with Handrail Brackets (K), using 5/16” X 2” bolts (4)
and locknuts (6). Handrail Stiffener should be positioned on the
outside
of the Stair Section.
Handrail Brackets should be positioned on the
inside
of the Stair Section.
Top of Lower Handrail (G) should butt against Top Handrail (F).
STEP 5
Install Rubber Tips (P) onto legs of Front U-Bar (B)
Get assistance to stand the ladder up. The easiest way to stand the ladder up is to lay it on its side, then
carefully stand it up. Once the ladder has been stood up, take it to a flat surface. Make sure the ladder is
firmly on the ground and sitting level.
STEP 6
Confirm the ladder is sitting level then tighten all hardware EVENLY around the ladder.
STEP 7
FINAL INSPECTION
-
Confirm that the ladder sits level on the floor.
-
Confirm that
all
hardware is fully tightened
.
-
NOTE : ASSEMBLY, USE, AND MAINTENANCE INSTRUCTIONS are attached to your ladder.
Refer to these instructions before using the ladder and on a regular basis thereafter.