16
3
Product Description
BVS SC-_1280Z00-07-0_0
SMART
CAMERA
IO
english
The I/O light interface provides 24 volt and two I/O signals (I/O 6 & I/O 7). These I/Os, similar to
the two I/Os at the power plug connectors (see section “Power” on page 14), are equipped
with a push-pull output stage and a PNP input.
I/O 6 & I/O 7 (I/O light plug connectors)
Operation as input
Voltage
Signal 0
0…5 V
< 2 mA
Signal 1
11…30 V
2…5 mA
Delay
0
→
1
< 150 µs
1
→
0
< 150 µs
Operation as output
Voltage
Signal 0
0 V (+V
D
)
100 mA max.
Signal 1
24 V (V
DC
– V
D
)
100 mA max.
Voltage drop V
D
< 2 V
Delay
0
→
1
< 10 µs
1
→
0
< 10 µs
Supply voltage output
Voltage
V
P
24 V (V
DC
– V
D
)
1.3 A max.
Voltage drop V
D
< 2 V
Among other things, this makes it possible to easily connect lighting equipment to the
SMART-
CAMERA
. Either the permanent voltage supply or the I/O signals can be used for this purpose.
The following example shows how the ring lighting BAE LX-VS-RR100 can be connected with
trigger and boost.
1
2
3
4
1
2
3
4
+V
P
I/O 6
GND
I/O 7
+V
DC
Boost
GND
Light
Trigger
Figure 10: I/O light circuit
The ring lighting is equipped with a M12 plug, so that it can be connected directly with the
SMART
CAMERA
. A complex wiring is not necessary.
Naturally, other sensors/actuators can also be connected, the corresponding switching examp-
les are located in the description of the power plug connector (see “Power” on page 14).
3.5.3 I/O Light
