Balluff MATRIX VISION mvBlueFOX Series, Technical Manual

Page: 172 / 238

164
Figure 3: Video device name
5. Finally, click on "Play" .
After a short delay you will see the live image of the camera.
1.18.10 Working with the Hardware Real-Time Controller (HRTC)
Note
Please have a look at the
Hardware Real-Time Controller (HRTC)
(p. 70 ) chapter for basic information.
There are several use cases concerning the Hardware Real-Time Controller (HRTC):
• "Using single camera" :
– Achieve a defined image frequency (HRTC) (p. 164 )
– Delay the external trigger signal (HRTC) (p. 166 )
– Creating double acquisitions (HRTC) (p. 167 )
– Take two images after one external trigger (HRTC) (p. 167 )
– Take two images with different expose times after an external trigger (HRTC) (p. 168 )
– Edge controlled triggering (HRTC)
(p. 170 )
• "Using multiple cameras" :
– Delay the expose start of the following camera (HRTC) (p. 171 )
1.18.10.1 Achieve a defined image frequency (HRTC)
MATRIX VISION GmbH