Balluff IO-Link BNI LH1-303-S11-K091, User Manual

Page: 25 / 58

www.balluff.com 5 english
BNI LH1-303-S11-K091 / BNI LH1-313-S11-K091
Network interface – Digital hub
1.1 Validity
This guide makes available all information required for the
safe use of the Balluff network interfaces
BNI LH1-3_3-S11-K091. It applies to the following models
(see Type code on page 18):
– BNI LH1-303-S11-K091
Order code: BNI00J8
– BNI LH1-313-S11-K091
Order code: BNI00J9
Read this guide and the other applicable documents
completely before installing and operating the product.
Original User’s guide
This guide was created in German. Other language
versions are translations of this guide.
© Copyright 2023, Balluff GmbH
All contents are protected by copyright. All rights reserved,
including the right to reproduce, publish, edit and translate
this document.
1.2 Other applicable documents
Additional information about this product can be found at
www.balluff.com on the product page, e.g. in the fol-
lowing documents:
– Data sheet
– Declaration of Conformity
– Disposal
1.3 Symbols and conventions
Individual actions are indicated by a preceding triangle.
►
Instruction 1
Action sequences are numbered:
1. Instruction 1
2. Instruction 2
Numbers unless otherwise indicated are decimals
(e.g. 23). Hexadecimal numbers are represented with a
preceding 0x (e.g. 0x12AB).
Note, tip
This symbol indicates general notes.
1.4 Explanation of the warnings
Always observe the warnings in this guide and the
measures described to avoid hazards.
The warnings used here contain various signal words and
are structured as follows:
SIGNAL WORD
Type and source of the hazard
Consequences if not complied with
►
Measures to avoid hazards
The individual signal words mean:
NOTICE
Identifies a danger that could damage or destroy the
product .
CAUTION
The general warning symbol together with the signal
word CAUTION indicates a hazard which can lead to
slight or moderate injuries .
DANGER
The general warning symbol in conjunction with the
signal word DANGER identifies a hazard which, if not
avoided, will certainly result in death or serious injury .
1.5 Technical terms and abbreviations used
EMC Electromagnetic compatibility
FE Functional earth
GND Ground
I/O-
Port
Input/Output Port
IOL IO-Link
NPN Ground-switching electronics
PNP Positive-switching electronics
U
A
Actuator supply
U
S
Sensor supply
1.6 Pictures
The illustrations generally show device variant
BNI LH1-303-S11-K091.
Product views and pictures in these operating instructions
may differ from the specified product.
1
About this guide