BSG TID-05-T30-01-005
13
4
The Easy Tool-ID System
4.9. Troubleshooting
System does not respond:
•
Verify that the data carrier is positioned correctly in front of the read/write head.
•
Verify that the system is correctly connected to the equipment.
•
Verify that a configuration is installed on the microcontroller. (See status indicator.)
•
If necessary, perform a reset. (Disconnect the system from the power and the USB port
from the HMI, wait a minute and then reconnect them.)
The system does not output the data in the correct sequence or outputs the wrong data:
•
Check whether the configuration was prepared according to the specifications
•
Verify that the data were correctly written on the RFID data carrier
•
Reinstall the configuration if necessary
Note
If none of the aforementioned measures remedies the error, Balluff Service will be
happy to help you.
https://www.balluff.com/local/de/support/