87
www.balluff.com
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
4
Configuration Using Barcodes
4.8
1D Symbologies
1D Code Selection
The reader supports the following 1D symbologies (barcode types). See
ing on page 177 for 2D barcodes. Symbology-dependent options are included in each chapter.
Default settings are indicated at each feature/option with a green arrow. Also reference
for a listing of the most widely used set of
standard factory settings. That section also provides space to record any custom settings needed
or implemented for your system.
To set most features:
1
Scan the ENTER/EXIT PROGRAMMING barcode at the top of applicable programming
pages.
2
Scan the correct barcode to set the desired programming feature or parameter. You may need
to cover unused barcodes on the page, and possibly the facing page, to ensure that the
reader reads only the barcode you intend to scan.
3
If additional input parameters are needed, go to
Appendix 18, Use the barcodes in this
appendix to enter numbers as you would select digits/characters from a keypad.
, and scan
the appropriate characters from the keypad.
-
Disable All Symbologies, page 88
-
-
-
-
-
Interleaved 2 of 5 (I 2 of 5), page 127
-
-
Interleaved 2 of 5 CIP HR, page 132
-
-
-
-
-
-
-
UPC/EAN Global Settings, page 101
-
-
-
-
-
-
-
-
Code 32 (Ital Pharmaceutical Code), page
114
-
GS1 DataBar™ Omnidirectional, page
155
-
Code 39 CIP (French Pharmaceutical), page
116
-
GS1 DataBar™ Expanded, page 157
-
-
GS1 DataBar™ Limited, page 162
-
-
-
-
-
-