84
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
Partial Label Reading Control
Enable/Disable to ignore partial labels to be read within the boundary of the field of view.
IPPL00
Partial Label Reading Control = Disable
IPPL01
Partial Label Reading Control = Enable
Decode Negative Labels
Enable/Disable the ability to decode a negative labels (white on black) for all symbologies. When
this feature is enabled, you will be unable to read normally-printed labels or programming labels in
this manual. Scan the “Disable” barcode below to return the reader to its default for this feature.
To set decoding for only 2D codes, go to "
2D Normal/Inverse Symbol Control" on page 179
.
CAUTION
VR00,P(C
R)
Decode Negative Label = Disable
DEFAULT
PVR01,P(CR)
Decode Negative Label = Enable
When this feature is enabled, you will be unable to read other programming
labels in this manual.
Unlike some programming features and options, Decode Negative label selec-
tions require that you scan only one programming barcode label. DO NOT
scan an ENTER/EXIT barcode prior to reading a Decode Negative label bar-
code.
