214
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
Configuration
Updates
See
in “References” for detailed information and examples of these features.
Automatic Configuration Update
When this feature is enabled, a reader and its linked Base Station can automatically ensure they
stay in sync with regard to application hardware and/or configuration.
$CBT-
Automatic Configuration Update = Disable
$CBT-
Automatic Configuration Update = Enable
DEFAULT
Copy Configuration to Reader
Scan the following label to copy the current Base Station configuration to the reader. Use this
method when the Auto Configuration Update feature is disabled and you want a one-time config-
uration update to be performed on the reader.
$CCpyCfg2HH
Copy Configuration to Reader
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction with
this barcode.
Copy Configuration to Base Station
Scan the following label to copy the current reader configuration to the Base Station. Use this
method when the Auto Configuration Update feature is disabled and you want a one-time config-
uration update to be performed on the Base Station.
Copy Configuration to Base Station
Cpycfg2Ba
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this barcode.
