BVS HS-PB
Industrial Cordless Handheld Barcode Reader
www.balluff.com
13
Operating Modes
27
13
Operating Modes
13.1
Scan Mode
The imager can be set to operate in one of several scanning modes.
See the OPM for more information and settings for any of the options:
Trigger Single (Default) —
When the trigger is pulled, scanning is
activated until one of the following occurs:
- a programmable duration
1
has elapsed
- a label has been read
- the trigger is released
Trigger Hold Multiple —
When the trigger is pulled, scanning starts
and the product scans until the trigger is released or “maximum scan
on time”
1
has elapsed. Reading a label does not disable scanning.
Double Read Timeout
1
prevents undesired multiple reads in this mode.
Trigger Pulse Multiple —
When the trigger is pulled and released,
scanning is activated until programmable duration
1
has elapsed or the
trigger has been pulled again to transition to another state. Double
Read Timeout
1
prevents undesired multiple reads while in this mode.
Flashing —
The reader flashes
1
on and off regardless of the trigger
status.
Always On —
No trigger pull is required to read a barcode. Scanning
is continually on. If the trigger is pulled, the reader acts as if it is in Trig-
ger Single (Default) Mode. Double Read Timeout
1
prevents undesired
multiple reads while in this mode.
Stand Mode —
No trigger pull is required to read a barcode. Scan-
ning is turned on automatically when an item is placed in reader’s field
of view. If the trigger is pulled, the reader acts as if it is in Single Read
mode. Double Read Timeout
1
prevents undesired multiple reads while
in this mode.
1.
See the Operational Manual (OPM) for more information
