www.balluff.com
10
5.2.2.
Measuring axis and direction for acceleration
In acceleration mode (
→5.4 Function Mode
)
,
the device measures the acceleration values on all 3 axes. The
measuring direction of three axes in the factory default setting is shown in Figure 11.
Figure 11
– Measuring axis and direction of acceleration
5.2.3.
Measuring axis and direction for gyroscope
In gyroscope mode
(
→5.4 Function Mode
)
,
the sensor measures the angular rate on all 3 axes
.
The measuring
direction of three axes in the factory default setting is shown in Figure 12.
Figure 12 - Measuring axis and direction of gyroscope
