Balluff BOS R254K-UUI-LE10-S4, User Manual

Page: 27 / 84

www.balluff.com 9 english
6.1 Startup
DANGER
Uncontrolled system movement
When starting up, if the sensor is part of a closed loop
system whose parameters have not yet been set, the
system may perform uncontrolled movements. This
could result in personal injury and equipment damage.
►
Persons must keep away from the system’s
hazardous zones.
►
Startup must be performed only by trained technical
personnel.
►
Observe the safety instructions of the equipment or
system manufacturer.
CAUTION
Visible laser radiation
If you look into the laser beam, temporary blinding and
irritation of the eyes is possible. The use of operating
elements or the implementation of settings or processes
which are not described in this user’s guide may cause
dangerous radiation exposure.
►
Do not look into the laser beam!
►
Take specifications in this user’s guide into
consideration.
1.
Check connections for tightness and correct polarity.
Replace damaged connections.
2. Turn on the system.
3. Check measured values and adjustable parameters
and realign and adjust the sensor, if necessary.
Check for the correct values, especially after
replacing the sensor or after repair by the
manufacturer.
6.2 Operation
CAUTION
Visible laser radiation
If you look into the laser beam, temporary blinding and
irritation of the eyes is possible. The use of operating
elements or the implementation of settings or processes
which are not described in this user’s guide may cause
dangerous radiation exposure.
►
Do not look into the laser beam!
►
Take specifications in this user’s guide into
consideration.
No additional protection measures are required (Laser
Class 1 per IEC 60825-1:2014). Complies with 21 CFR
1040.10 and 1040.11 with the exception of conformity
with IEC 60825-1 Ed. 3, as described in Laser Notice No.
56 dated May 8, 2019.
6.3 Operating notes
– Regularly check function of the sensor and all
associated components.
– Take the sensor out of service whenever there is a
malfunction.
– Secure the system against unauthorized use.
– Check fasteners and retighten if needed.
6.4 Cleaning
Keep the lens as free from soiling as possible (dust etc.)
and do not touch it (fingerprints).
Remove soiling
►
Wipe off the lens with a lint-free cloth and alcohol
(ethanol, isopropanol).
6.5 Maintenance
The product is maintenance-free.
6
Startup and operation
BOS R254K-UUI-L_1_-S4
Photoelectric Sensors