Balluff BOS R080K-UIM-RE10 Series, Manual

Page: 198 / 212

92 english
6.5 Pin Assignment
6.5.1 Description
Two different internal digital and analog signals are
available that can be output or read in at the pins of the
device.
Pin 4 and pin 2 can be configured with the following
functions:
Pin 4:
Digital Output
Pin 2:
– Digital Output
– Digital Input
– Analog Output
6.5.2 ISDU
Name Index Sub-
index
Access Length Data Type Data Storage Default
Pin 4 Function 0x0090
(144)
0 R/W 2 Byte Yes
Behavior IO-Link 1 R/W 1 Byte UINT8(ENUM) No 0x00 (0) IO-Link
Mode 2 R/W 1 Byte UINT8(ENUM) No 0x01 (1) = Digital
Output
Pin 4 Digital
Configuration
1)
0x0091
(145)
0 R/W 4 Byte Yes
Signal Source 1 R/W 2 Byte UINT16(ENUM) No 0x0038 (56) = ADSS1
Logic 2 R/W 1 Byte UINT8(ENUM) No 0x00 (0) = Normal
Type 3 R/W 1 Byte UINT8(ENUM) No 0x02 (2) = Push-Pull
Pin 2 Function 0x0093
(147)
0 R/W 2 Byte Yes
Behavior IO-Link 1 R/W 1 Byte UINT8(ENUM) No 0x01 (1) = Normal
Operation
Mode 2 R/W 1 Byte UINT8(ENUM) No 0x01 (1) = Digital
Output
Pin 2 Digital
Configuration
1)
0x0094
(148)
0 R/W 4 Byte Yes
Signal Source 1 R/W 2 Byte UINT16(ENUM) No 0x003A (58) = LSSC1
Logic 2 R/W 1 Byte UINT8(ENUM) No 0x00 (0) = Normal
Type 3 R/W 1 Byte UINT8(ENUM) No 0x02 (2) = Push-Pull
Pin 2 Analog
Configuration
2)
0x0095
(149)
0 R/W 4 Byte Yes
Signal Source 1 R/W 2 Byte UINT16(ENUM) No 0xFFF7 (65527) =
Transducer Signal
Characteristic 2 R/W 1 Byte UINT8(ENUM) No 0x00 (0) = Rising
Type 3 R/W 1 Byte UINT8(ENUM) No 0x00 (0) = 4…20mA
1)
The settings in the digital configuration are only used if the pin was configured as a digital output or digital input.
2) The settings in the analog configuration are only used if the pin was configured as an analog output.
Tab. 6-11: Pin assignment – ISDU
6
System Functions (continued)
BOS R080K-UIM-RE10-…
Photoelectric Sensors