www.balluff.com
3
2
Safety
2.1. Intended use
This guide describes The BNI PBS-… serves as a decentralized input/output module for
connecting to a Profibus network. The integrated IO-Link ports enable simple linking of IO-
Link capable sensors, actuators and sensor / actuator hubs. The module may be used only
for this purpose in an industrial environment corresponding to Class A of the EMC Law.
Via PIN 2/5 Power Aux (Auxiliary power) function provides 24V DC power supply for
actuators.
2.2. Installation and
startup
Attention!
Installation and startup are to be performed only by trained specialists. Qualified
personnel are persons who are familiar with the installation and operation of the
product, and who fulfills the qualifications required for this activity. Any damage
resulting from unauthorized manipulation or improper use voids the
manufacturer's guarantee and warranty. The Operator is responsible for ensuring
that applicable of safety and accident prevention regulations are complied with.
2.3. General safety
instructions
Commissioning and inspection
Before commissioning, carefully read the user's guide.
The system must not be used in applications in which the safety of persons is dependent
upon proper functioning of the device.
Authorized personnel
Installation and startup must only be carried out by trained technical personnel.
Intended use
Warranty and liability claims against the manufacturer are rendered void by:
−
Unauthorized tampering
−
Improper use
−
Use, installation or handling contrary to the instructions provided in this user's
manual
Obligations of the operating company
The device is a piece of equipment in accordance with EMC Class A. This device can
produce RF noise. The operator must take appropriate precautionary measures. The device
may only be used with an approved power supply. Only use approved cables.
Malfunctions
In the event of defects and device malfunctions that cannot be rectified, the device must be
taken out of operation and protected against unauthorized use.
Intended use is ensured only when the housing is fully installed.
2.4. Resistance to
aggressive
substances
Attention!
The BNI modules generally have a good chemical and oil resistance. When used
in aggressive media (eg chemicals, oils, lubricants and coolants each in high
concentration (ie, low water content)) must be checked prior application-related
material compatibility. In the event of failure or damage to the BNI modules due
to such aggressive media are no claims for defects
Hazardous
voltage
Attention!
Disconnect all power before servicing equipment.
Note
In the interest of product improvement, the Balluff GmbH reserves the right to
change the specifications of the product and the contents of this manual at any
time without notice.