IO-Link Sensor-Hub / Actuator Hub
www.balluff.com
6
3
Getting Started
Sensor Hub
connection
Connection protection ground to FE terminal, if present.
Connect the incoming IO-Link line to the Sensor Hub.
Note!
A standard sensor cable is used for connecting to the host IO-Link Master.
Module versions
Sensor Hub Version
Digital Port
BNI IOL-302-000-K006
16 Inputs / Outputs configurable
BNI IOL-302-S01-K006
16 Inputs / Outputs configurable, with
single channel monitoring
BNI IOL-302-000-K006-C01
16 Inputs / Outputs configurable, with
identification
BNI IOL-302-S01-K006-C01
16 Inputs / Outputs configurable, with
single channel monitoring and identification
3.6
Digital Sensors
Digital Input- / Output port (M12, A-coded, female)
Pin
Function
1
+24 V, 200 mA
2
Standard Input / Output
3
0 V, GND
4
Standard Input / Output
5
FE
Note!
For the digital sensor inputs follow the input guideline per EN 61131-2, Type 2.
Note!
Digital Outputs can be loaded with maximum 350 mA.
Total current of actuator supply is maximum 1.6 A
Note!
Unused I/O port sockets must be fitted with cover caps to ensure IP67 protection
rating.
