Balluff BNI EIP-502-105-R015, User Manual

Page: 90 / 274

www.balluff.com 33
8 Display
8.1. General With the implemented display, the address is output directly to the devices BNI EIP…
The following address types are possible:
• IP address
• Subnet mask
• Gateway address
Each address is composed of 4 octets.
The display also shows information about the hardware and firmware update.
The display has a locking function that can be enabled from the control panel. If the lock is
set, no more editing can be done (see bit layout, Chapter 6.2 Standard output data).
8.2. Address
Specifications
IP address: 192.168.1.1
Subnet mask: 255.255.255.0
Gateway address: 192.168.1.1
8.3. Control and
Display
1 Display
2 Arrow key
3 Octet cursor 4 Address type cursor
5 "Set" key
6 LED
8.4. Display
Information
IP: IP address
SN: Subnet address
GW: Gateway address 3: First octet
2: Second octet
1: Third octet
0: Fourth octet
S
↑
IP
SN
GW
3 2 1 0
1
2
3
4
5
6
2 3 1
0
Cursor for selecting the address type
Cursor for selecting the octet
IP
SN
GW