Balluff BML SL1-ALZ1 ZZ-ABA S284/KA Series, User Manual

Page: 54 / 144

24
9.6 Guided magnetic encoder system
Sensor guide consisting of a BML-R01-M_ _ _ aluminum
rail to hold the magnetic tape and a
BAM GM-ML-01-C04 (BAM021H) slide with gliders to
guide the sensor head.
Fig. 9-3: Sensor head with glider
9.7 Connector with S284 plug
Used with BML SL1-ALZ_-_ _ZZ-A_ _ _-S284.
Permissible bending radius
Fixed routing
Moved
7.5 × outer diameter
15 × outer diameter
Feature Suitable for use with drag
chains
Cable coating PUR
Fig. 9-4:
~44
M12x1
D
Ø14.5
Connector with M12 plug, 12-pin
For the pin assignment and colors see Tab. 4-5
on page 14.
Type Order
code
Diameter Length Cable
resistance
1)
Supply voltage
[mm] [m] [Ohm] 5 V 24 V
Not UL Listed; 0.1 million drag chain cycles
BCC M41C-0000-1A-169-PS0C08-020-C009 BCC09MW
4.9 +0.3
2 0.8 X X
BCC M41C-0000-1A-169-PS0C08-050-C009 BCC09MY 5 2 X X
BCC M41C-0000-1A-169-PS0C08-100-C009 BCC09MZ 10 4
2)
X
BCC M41C-0000-1A-169-PS0C08-150-C009 BCC09N0 15 6
2)
X
BCC M41C-0000-1A-169-PS0C08-200-C009 BCC09N1 20 8
2)
X
UL Listed; 10 mil. drag chain cycles
BCC M41C-0000-1A-169-PS0C25-050-C009 BCC0JCN
7 ±0.3
5 0.8 X X
BCC M41C-0000-1A-169-PS0C25-100-C009 BCC0JCP 10 1.5 X X
BCC M41C-0000-1A-169-PS0C25-200-C009 BCC0JCR 20 3.1
2)
X
1)
Out and back cable
2)
Note voltage drop on the cable
Tab. 9-1: Connectors: cable lengths and ohmic resistance
9
Accessories (continued)
BML SL1-ALZ1- _ _ ZZ -ABA _ - S284/KA _ _
Absolute magnetic encoder system
english