Balluff BML SL1-ALZ-ZZ Series, User Manual

Page: 74 / 254

22
6
IO-Link-Smart Sensor Profile (BML SL1-ALZ0-U1ZZ-…) (continued)
6.5.2 Data storage
Index Subindex Name Size Access Values
Data storage
0x0003 (3)
1 Command 1 byte Read/Write
(The parameter Data Storage is needed
by the IO-Link master for the data storage
function. This parameter does not provide
any ability for setting.)
2 State Property 1 byte Read Only
3 Size 4 bytes Read Only
4 Parameter Checksum 4 bytes Read Only
5 Index List 62 bytes Read Only
Tab. 6-3: Data storage parameter
6.5.3 Device Access Locks
With this standard parameter, it is possible to activate or
deactivate certain functions of the IO-Link device.
With the BML SL1 it is possible to lock out the function of
the parameter manager and the button. To do so, the
respective bit of the 2-byte value must be set to 1 (locked).
In order to unlock the parameter manager, bit is set to 0.
Bit 0 Lock parameter access
(not supported)
Bit 1 Lock parameter management
(supported)
Bit 2 Lock local parameterization
(supported)
Bit 3 Lock local user interface
(not supported)
Bits 4...15 Reserved
Tab. 6-4: Lock parameter data
6.5.4 Profiles and functions (ProfileCharacteristic)
This parameter indicates which profile is supported by the
IO-Link device. BML SL1… supports the Smart Sensor
profile with a process data variable:
Subindex Value Description
1 0×0001 DeviceProfileID: Smart Sensor
Profile
2 0×8000 FunctionClassID: Device
Identification Objects
3 0×8002 FunctionClassID: Process Data
Variable
Tab. 6-5: Supported profiles
BML SL1-ALZ _-_ _ ZZ- _ _ _ _ - _ _ _ _
Absolute Magnetically Coded Position Measuring System
english