Balluff BML SL1-ALZ-ZZ Series, User Manual

Page: 57 / 254

www.balluff.com 5
1.1 Validity
This guide describes the construction, function and
installation options for the BML absolute magnetically
coded position measuring system. It applies to the
following models (see part numbering on page 46):
– BML SL1-ALZ0-U1ZZ - _ U1L- S284/S4/KA _ _
– BML SL1-ALZ1-UE/MZZ- _ U1L -S284/S4/KA _ _
– BML SL1-ALZ1- _ _ ZZ -ABA _ - S284/KA _ _
The guide is intended for qualified technical personnel.
Read this guide before installing and operating the linear
head.
Additional information about the interfaces can
be found in the document Interfaces for BML
Magnetic Encoder (see Tab. 13-1 on
page 47).
1.2 Symbols and conventions
Individual instructions are indicated by a preceding
triangle.
►
Instruction 1
Action sequences
are numbered consecutively:
1.
Instruction 1
2.
Instruction 2
Numbers unless otherwise indicated are decimals (e.g.
23). Hexadecimal numbers are represented with preceding
0x (e.g. 0x12AB).
Note, tip
This symbol indicates general notes.
1.3 Scope of delivery
– Sensor head BML SL1
– Condensed guide
Magnetic tapes are available in various models
and must be ordered separately (see
Accessories on page 43).
1.4 Approvals and markings
UL approval
File no.
E227256
The CE Mark verifies that our products
meet the requirements of the current
EMC Directive.
The transducer meets the requirements of the following
product standard:
– EN 61326-2-3 (noise immunity and emission)
Emission tests:
– RF emission
EN 55011
Noise immunity tests:
– Static electricity (ESD)
EN 61000-4-2 Severity level 4
– Electromagnetic fields (RFI)
EN 61000-4-3 Severity level 3
– Electrical fast transients (burst)
EN 61000-4-4 Severity level 3
– Surge EN 61000-4-5 Severity level 2
– Conducted interference induced by
high-frequency fields EN 61000-4-6 Severity level 3
– Magnetic fields EN 61000-4-8
Severity level 5
More detailed information on the guidelines,
approvals, and standards is included in the
declaration of conformity.
1.5 Abbreviations
1Vpp Incremental sin/cos interface
BML Balluff magnetic linear head system
CRC Cyclic Redundancy Check
IODD IO Device Description
MDC Measurement Data Channel
PD Process Data
PDV Process Data Variable
SIO Standard Input Output
SSC Switching Signal Channel
1
Notes to the user
BML SL1-ALZ _-_ _ ZZ- _ _ _ _ - _ _ _ _
Absolute Magnetically Coded Position Measuring System
english