Balluff BIS V-830-3-011-B-000, User Manual

Page: 72 / 98

22 english
BIS V-830-3-011-B-00_ / BAM MD-IS-001-0005 / HF/LF-RFID-App (BIS M/L/C) /
BIS U-830-4-011-H-_/ BIS C-830-4-011-A / BIS M-830-4-011-A
Mobile RFID devices
5
Operation (continued)
5.13 Using the plug-in modules
UHF write/read module BIS U-830-4-011-H-_
After the UHF write/read module has been inserted in the
basic device (top slot, see chapter 5.9 on page 20), it
can be used for reading out UHF RFID data carriers.
The module must be initialized using a software
application. Afterwards the read process can be performed
using the software application.
The plug-in module can become very warm
during continuous operation. In order to protect
individuals and the module, the maximum time of
a scan is restricted to two minutes.
LF plug-in module BIS C-830-4-011-A
After the LF plug-in module has been inserted in the basic
device (top slot, see chapter 5.9 on page 20) together
with a read/write head (type BIS C), it can be used for
reading out RFID data carriers (Typ BIS C).
LF/HF plug-in module BIS M-830-4-011-A
A read/write head must be plugged in at the time the app
is started so that its type (BIS VL / BIS VM) can be read. If
the read/write head is inserted after the app has been
started, the app must be restarted or the module (with
read/write head) must be plugged in again.
To increase the range of movement of the read/write
heads, they can be connected via a sensor cable (see
section 5.12 auf Seite 21).