www.balluff.com
Handheld Programmer
BIS U-870
21
Read memory of
the data carrier
5.3 Writing data
To read the memory of a data carrier, hold
►
the sensing surface of the Handheld
Programmer to the data carrier you wish to
read.
Click the
►
[Read]
button.
The
⇒
„Operate“
field begins to flash
yellow and the label of the
[Read]
button changes to
[Abort]
(abort read
operation).
If the read operation was successful,
⇒
„Reading succeeded“ appears in red
text to the right of the
[Read]
button
and the result is displayed under the
[Read]
button.
Figure 15: Write operation successful
To write the memory of a data carrier, hold
►
the sensing surface of the Handheld
Programmer to the data carrier to which you
wish to write.
Click the
►
[Copy]
button to insert the previ-
ously read data in the input field below the
[Write]
button or click the input field under
the
[Write]
button to enter the data
manually.
Click the
►
[Write]
button.
The
⇒
„Operate“
field begins to flash
yellow and the label of the
[Write]
button changes to
[Abort]
(abort write
operation).
If the write operation was successful,
⇒
„Writing succeeded“ appears in red text
to the right of the
[Write]
button.
Figure 16: Write operation successful
Operation
5
