Balluff BIS U-6026-034-104-06-ST35, User Manual

Page: 63 / 144

www.balluff.com 15 english
5
Technical data (continued)
5.5 Control inputs/outputs
Digital input (+IN, –IN)
Control inputs 2, galvanically isolated
(optocoupler)
Control voltage active 4…40 V
Control voltage inactive –40…+1.5 V
Input current at 24 V
11 mA
Fig. 5-3:
,1
,1
Digital input (+IN, –IN)
Control output (01, 02, 03, 04)
Control outputs 4, galvanically isolated
(optocoupler), PNP, positive-
switching
Operating voltage
Output V
S
19.2…28.8 V DC
Output current ≤ 50 mA
Voltage drop at 20 mA Approx. 2.5 V
Output resistance R
A
10 kΩ to –V
S
Fig. 5-4:
96
287
96
5$
37&
Control output (01, 02, 03, 04)
5.6 Operating conditions
Ambient temperature –20 °C…+55 °C
Storage temperature –20 °C…+60 °C
Noise radiation
FCC Part 15 B Cl. A
Vibration/shock EN 60068 Part 2-2-6/27/32
This UHF system consists of a processor unit and
antennas as outlined in the specifications and may only be
operated in industrial environments and only in the listed
countries issuing operating licenses, subject to all
applicable national legal regulations and standards (see
chapter Safety on page 6).
5.7 Data carrier
ISO 18000-6 Type C
EPCglobal™ Class 1 Generation 2
5.8 Multi-tagging
Configured EPC length Maximum number of data
carriers (sum of all active
antennas)
96 Bit 25 data carriers
496 Bit 15 data carriers
Multitagging operation is supported starting
with device software version 1.2 (see part label).
5.9 Function displays
Operating states LED
Ready Green
Error Red
Tag present Orange
Digital input 1 Orange
Digital input 2 Orange
Digital output 1 Orange
Digital output 2 Orange
Digital output 3 Orange
Digital output 4 Orange
Status EtherNet/IP LED
Module Status Red/Green
Network Status Red/Green
Data Rate Red/Green
Link/Activity Red/Green
BIS U-6026-034-1_4-06-ST35
Processor unit