Balluff BIP LD2-T017-01-EP-S4 Series, User Manual

Page: 137 / 212

6
Interfaz IO-Link (continuación)
6.6 Parámetros específicos del sensor
índice
hex (dec)
Subíndice
hex (dec)
Parámetro Formato de
datos
(longitud)
Acceso Rango de
valores/ (valor
especificado)
Observaciones
0x0052
(82)
0x00 (0) Device Temperature int8 (5 bytes) Read only Todos los valores
0x01 (1) Device Temperature
Actual
int8 (1 byte) Read only –128…+127
0x02 (2) Device Temperature Min int8 (1 byte) Read only –128…+127
0x03 (3) Device Temperature Max int8 (1 byte) Read only –128…+127
0x04 (4) Device Temperature Min
Lifetime
int8 (1 byte) Read only –128…+127
0x05 (5) Device Temperature Max
Lifetime
int8 (1 byte) Read only –128…+127
0x0053
(83)
0x00 (0) Device Temperature
Thresholds
int8 (2 bytes) Read/Write –128…+127
0x01 (1) Device Temperature
Thresholds Min.
int8 (1 byte) Read/Write –128
0x02 (2) Device Temperature
Thresholds Max.
int8 (1 byte) Read/Write 127
0x0057
(87)
0x00 (0) Operating Hours uint32
(12 bytes)
Read only
0x01 (1) Operating Hours total uint32 (4 bytes) Read only
0x02 (2) Operating Hours since
maintenance
uint32 (4 bytes) Read only
0x03 (3) Operating Hours since
startup
uint32 (4 bytes) Read only
0x0058
(88)
0x00 (0) Boot Cycle Counter uint32 (8 bytes) Read only
0x01 (1) Boot Cycles total uint32 (4 bytes) Read only
0x02 (2) Boot Cycles since
maintainance
uint32 (4 bytes) Read only
0x00C1
(193)
0x00 (0) PDV Offset int16 Read/Write –15000…
+32000
0x00C2
(194)
0x00 (0) PDV Preset int16 Read/Write –32000…
+32000
Nuevo valor de
salida con Preset
Teach-In
0x00C3
(195)
0x00 (0) PDV Charakteristik uint8 Read/Write 0x00 – normal
0xFF – invertido
0x00C4
(196)
0x00 (0) PDV Enable Detection
Range
uint8 Read only (0x00) Función no
implementada
0x4080
(16512)
0x00 (0) MDC Descriptor (7 bytes) Read only
0x01 (1) MDC Low Limit int16 (2 bytes) Read only (0)
0x02 (2) MDC High Limit int16 (2 bytes) Read only (17000)
0x03 (3) MDC Unit Code uint16 (2 bytes) Read only 1010 Unit Code para μm
0x04 (4) MDC Scale int8 (1 byte) Read only –6
Tab. 6-8: Parámetros específicos del sensor
www.balluff.com 15 español
BIP LD2-T017-01-EP _ _ / EP _ _ -S4
Sistema inductivo de medición de posición