Balluff Inductive Coupler
BIC 1B0-IT1A7-Q40KFU-SM4A4A (Base)
BIC 2B0-IT1A7-Q40KFU-SM4A5A (Remote)
www.balluff.com
8
4
Installation
4.5 180° Rotation of
the Connector
Insert
The connector insert on the base and remote can be rotated 180°.
To do this follow the disassembly steps (1 through 6) described in the following. After the
connector insert is rotated (step 7), subsequent reassembly is performed in reverse order.
Disassembling
the Holder
1. Loosen the grub screw
2. Pull off the BIC holder
3. Loosen the two countersunk screws
4. Remove the BIC base
5. Pull out the safety pin
6. Slide out the connector insert
7. 180° Rotation of the Connector Insert
Note
The design allows for disassembling/assembling to rotate the connector insert only
twice.
