Balluff BAE SA-OH-061-UA-DP02, User Manual

Page: 43 / 48

www.balluff.com 19 english
7
Menu structure (continued)
7.7 LED Meaning
Description
Only the signal with the highest priority is displayed. The signals are listed in descending priority.
LED PWR (Operating state and communication)
Name Signal Meaning
Ready Green, static The device is ready.
Tab. 7-11: Meaning of the LED states, LED PWR
LED Alarm (Indication/Warning/Teach)
Name
Signal Meaning
Teach-in No Object Red, flashing, 2 Hz 1:1
The sensor is in Teach-In mode and no object is visible.
Teaching is not possible.
Teach-in Red, static The device is currently in teach-in mode.
Bad Signal Quality Red pulse 50 ms
Poor signal quality, the signal quality is below the war-
ning threshold.
Tab. 7-12: Meaning of LED States, LED Alarm
LED SIG
Name
Signal Meaning
SIG Yellow, static Signal status (Signal ≥ Teach Point)
Tab. 7-13: Meaning of LED States and Configuration, LED SIG
LED SYNC
Name
Signal Meaning
SYNC Orange, static Synchronization established
Tab. 7-14: Meaning of LED States and Configuration, LED SYNC
BAE SA-OH-061-UA-... / BAE SA-OH-062-IC-...
Photoelectric Sensors