background image

Safety Rules  

Safety rules 

ATTENTION! 

The  general  safety  rules  should  be  observed  during 
operation os any electrical appliance. 
To eliminate risk of fire, electrical shock, accidents or 
property damage: 

Prior  to  using  the  heater  read  the  Manual  and
keep in an accessible place. 

Use  the  heater  only  at  the  voltage  specified  on
the nameplate. 

To avoid overheating and fire never obstruct air
flow through the inlet and outlet grills. 

Avoid  placing  the  heater  in  the  vicinity  of  any
surface; this may lead to obstruction of the grills 
and impaired air intake and outlet. 

Avoid  placing  the  heater  in  the vicinity  of  other
heaters. 

Do not  use  the  heater in  the  places  where  fuel,
paint or other flammable liquids are stored. 

This  appliance gets  hot  during  operation.  Never
touch  hot  surfaces  to  avoid  burns.  Turn  the 
appliance off and let it cool down before moving 
to another place. 

Never use the heater for drying clothes.

Never insert foreign metal objects into the inlet
and  outlet  orifices;  this  may  lead  to  electric
shock, fire or damage of the device.

Never  immerse  the  device  in  a  liquid,  keep  the
device  away  from  liquids;  otherwise,  electric
shock is possible.

If the device falls in water, do not try to take it out
of it. Immediately take the plug out of the socket.

Never operate the heater with damaged cable, plug
in  case  of  faults,  falls  or  other  damages.  Contact  a
skilled  electrician  to  check  electrical,  mechanical
adjustment,  for  service  maintenance  or  repair  of
the heater.

Never touch the working heater with wet hands.

The  most  common  cause  of  overheating  is  dust
inside  the  heater.  Remove  the  accumulated  heat
regularly.  For  this,  disconnect  the  device  from  the
mains and clean the vent orifices and the grills with
the vacuum cleaner.

Do not place the device on the window-sill: ingress 
of raindrops may lead to electric shock.

Never  use  abrasive  detergents  during  cleaning.
Clean it with the cloth (not soaking) wetted with hot
soaped  water.  Before  cleaning  always  disconnect
the device from the mains.

Do  not  connect  the  device  to  the  power  source
prior to full assembly and adjustment.

Do  not  use  the  device  in  the  vicinity  of  bath, 
shower,  swimming  pool  or  other  containers  with
liquids.

The device should be used in vertical position.

Before moving the device turn it OFF and let it cool
down.

Do  not  use  the  device  with  twisted  power  cable: 
this may lead to overheating and accidents.

It is not recommended to use an extension cable.

Do  not  take  the  plug  out  of  the  socket  before
turning the device OFF.

Never pull the cable when taking the plug out of the
socket: hold the plug.

Disconnect  the  device  from  the  mains  if  it  is  not
used.

Summary of Contents for Plaza Ext Series

















Reviews: