BALLAST BL-3148, Instruction Manual

Page: 3 / 14

USING THE SCREW-DOWN CROWN
Do NOT pull the crown unless it is UNSCREWED first:
NOTE: Failure to SECURELY screw down the crown after setting the watch
may affect its water resistance.
TO UNSCREW:
Turn the crown anti-clockwise until it turns freely
without tension.
GENTLY pull the crown out to the
other desired positions for watch setting (see specific
operating instructions on the following pages).
TO SCREW:
Push the crown ALL THE WAY IN (towards the
watch) THEN begin to turn clockwise until it is
securely screwed down.
0
1
2
BEFORE YOU USE THIS WATCH,
IT IS RECOMMENDED THAT YOU MANUALLY WIND THE
MAINSPRING TO START IT MOVING.
THIS WATCH IS AN AUTOMATIC WATCH EQUIPPED WITH A MANUAL
WINDING MECHANISM.
WINDING THE MAINSPRING
1. Unscrew the crown by turning it anti-clockwise.
2. When it is in position
[1]
, turn the crown clockwise to wind.
Wind 5-10 times and it will start to move naturally after shaking
slightly.
1
0
3