Page 4 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as
they can damage the finish. Dust with soft cloth.
STEP 3: Use a screwdriver to press down and firmly turn screw clockwise until it begins to slip indi-
cating the barrel has crimped against inside of drywall. Back out and completely remove Screw,
leaving bolt/anchor in wall. Position Bracket (D), align holes, replace and tighten Screw.
Barrel
Turn screw until it slips
Remove screw
STEP 4: With Bracket (D) firmly attached to wall, carefully lift Drying Rack (C) and engage cleat on
back with Bracket as illustrated below. Gently push/pull down until Rack is fully seated and locked in
place.
Bac
k of
Ra
ck
(D)
(C)