(A)
(D)
(B)
(C)
WALL S
TUD
WALL BRACKET MUST BE ATTACHED TO WALL STUD
WALL ANCHORING HARDWARE (ANTI-TIP)
Serious or fatal crushing injuries can occur from a furniture tip-over
Tip-Over Hazard
Prevent tipping accidents. Anchor your furniture.
WARNING
Ltr.
A
4
Small Screw
Retention Belt
Qty.
Hardware Included
B
4
Large Screw
C
4
Bracket
D
2
1. Place furniture against wall at desired location then locate and mark a Wall Stud behind unit.
2. Corresponding to Stud location, attach one Bracket (C) to back of unit using Small Screws (A).
3. To keep hardware out of view after installation, attach remaining Bracket (C)
INTO WALL STUD
with Large Screws (B) 2 inches below Bracket attached to back of unit.
4. Move unit into place, align Brackets then connect both using Retention Belt (D).
5. Confirm Belt is securely laced and locked.
Representative Image
Not meant to be actual item included with
these instructions.
Page 2 of 2
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
