Ballard Designs Toulouse MV362 Manual Download Page 6

Page: 6 / 6

Retention Belts

Brackets

Qty.

Hardware Included

Screws

Anchors

Hardware Included

Cleaning & Care:

Apply a very thin coat of wax with a soft cloth and keep away from direct sunlight.

Page 6 of 6

Customer Service: 800-367-2810

Online: www.ballarddesigns.com

Wall

(G)

Anti Tip Installation: Screw the Brackets in the Anti Tip Kits (F) into wall studs or use

a 1/16” Drill Bit to screw a pilot hole to tap in an Anchor and screw in the Screws. The Screws should

be 2 Inches below the D-Rings already attached to the Bookcase. Align the Brackets and D-Rings

vertically and string in the Retention Belts. Confirm Straps are securely laced and locked.

NOTE: It is ideal that at least one screw goes into a stud.

(P)

(K)

(P)

NOTE: Assemble the Bookcase in the desired location.

STEP 7: Insert the Shelf Guards (P) into the Side Frames (N & O) by inserting the Guards into

the front holes of the Side Frames first and then sliding the back of the support into the

corresponding key hole in the Side Frames back. Make sure the button on the Guard

is facing inward and the Guards are in a horizontal position.

Summary of Contents for Toulouse MV362






