Page 3 of 3
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(C)
(B)
(D)
(A)
WALL BRACKET MUST BE ATTACHED TO WALL STUD
WALL S
TUD
(6 x
3
4
'')
(6 x1
1
2
'')
5. Confirm Belt is securely laced and locked.
4. Move unit into place, align Brackets then connect both using Retention Belt (D).
with Large Screws (B) 2 inches below Bracket attached to back of unit.
3. To keep hardware out of view after installation, attach remaining Bracket (C) INTO WALL STUD
2. Corresponding to Stud location, attach one Bracket (C) to back of unit using Small Screws (A).
1. Place furniture against wall at desired location then locate and mark a Wall Stud behind unit.
2
D
Bracket
4
C
Large Screw
4
B
Hardware Included
Qty.
Retention Belt
Small Screw
4
A
Ltr.
WALL ANCHORING HARDWARE (ANTI-TIP)
Serious or fatal crushing injuries can occur from a furniture tip-over
Tip-Over Hazard
Prevent tipping accidents. Anchor your furniture.
WARNING
