Page 3 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Assemble in location for intended use.
STEP 1: Determine location for each Shelf (C) and insert Shelf Supports (A) into corresponding
pre-drilled holes. Carefully place each Shelf level upon Supports. NOTE: Left and Right Shelves have
notches in back corners. Center Shelf does not have a notch.
LEVELERS: Sideboard is equipped with Rotary Levelers installed under each leg. Sideboard may be
adjusted by carefully lifting applicable corner and turning Leveler clockwise/counterclockwise. If doors
are misalingned, adjusting Levelers may help with alignment.
Cleaning and Care
Avoid harsh or abrasive chemicals as finish damage may result.
Use coasters, trivets, place mats to protect surfaces. Promply remove spills.
Dust with a soft, dry cloth.