(A)
(F)
Page 4 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Assemble in location for intended use.
STEP 3: Determine location for each Shelf (F) then insert Shelf Supports (A) into applicable pre-drilled
holes along wall of each compartment. Carefully place each Shelf level upon supports.
NOTE: Right compartment is designed with an opening for use with a CPU. If using compartment
for housing a CPU, do not install Shelf or Shelf Supports.
CPU COMPARTMENT: To place CPU in Secretary, slide open rear door and slide CPU in from back. TO
ALLOW FOR CPU HEAT DISSIPATION permit unit to slightly hang out of back of compartment. This will
also provide space for the front door to completely close.
Connect all cables and cords BEFORE attaching Wall Anchoring Hardware.
Installed Power Strip is NOT a Surge Supressor/Protector.
