Page 5 of 6
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(G)
(A)
(F)
(F)
(I)
(J)
Attach Chains (G) to Hooks (A).
STEP 5: COVER VISIBLE HOLES. Return Swing upright and insert a Plug (F) into each hole on side
of Right Arm (I) and Left Arm (J). NOTE: A Rubber Mallet may be needed to gently tap and seat Plug.
STEP 6: Swing can support up to 800 lbs. *To prevent personal or property damage, all swings
should be installed by a Licensed Building Contractor.
Hanging hardware is not included as it
needs to be determined on site.
Building support beams must be adequately designed and/or
reinforced to support at least the rating of the swing. Connect Chains (G) to Chain Hooks (A).
WARNING
Falling Hazard
SWING MUST BE SUPPORTED BY ADEQUATE STRUCTURE
Consult with a Licensed Building Contractor before installation.