Page 2 of 2
Operating manual:
1.
Remove the light set from the package and unroll
before use.
2.
Please do not connect this light set to the power while it is
still in the packaging.
3.
The light set can only be connected to the IP44 transformer
that is enclosed in the box.
4.
Ensure that the power source matches product requirements.
5.
The 8-functions of this light set are controlled by a control
box. Press the right button on the control box to change
the function.
6.
To enable the timer on this light set press the left button on
the control box. The button lights up green when the timer
is set. The light set will now automatically switch off after 8
hours. The light set automatically lights up the next day at
the same time the timer was set.
7.
The lamps are not replaceable; should a lamp become
defective, others will continue to function.
8.
Do not connect multiple sets together.
9.
The power cord of the light set cannot be replaced; Where
breakage or damage to the cord occurs, the light-set must
not be powered but disposed of safely.
10. Avoid any damage to the insulation of the wiring.
This light set can be used both indoor and outdoor.
Please retain this document for future reference!
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Assemble in location for intended use.
